Vayuvents Private Limited

Extraction is the process of forcefully removing trapped air from factory shed creating a vacuum or low pressure zone, which is then neutralized by drawing of cool air from outside and completing the convection cycle. Depending on the size Roof Extractors exhaust large amount of the heat & smoke accumulating at roof level of the factory. They are ideally suited in Boiler , Steam Foundries, Forge shops, Heat Treatment shops and Automobile factories. Vayuvents Private Limited – one of the largest manufacturers of Roof Extractor Fans, Motorized Roof Exhaust Fan, Roof Exhaust Fan, Power Driven Roof Extractors, Axial Flow and Industrials Roof Extractor Fans, Roof fan, Roof exhaust fan in India. Roof Extractor Fans are low profile Axial fans which utilise to extract the air through impeller, parallel to the shaft around which the blades rotate. Advantages / Features of Roof Exhaust Fan Deliver the performance you need with a roof extractor tubular axial fan. Lower power consumption. Longer life of fans due to improved mechanical strength. Slim compact Design Quiet Operation, Low Weight. Use minimal space, can be used in conditions with space restrictions. Wide range available and can work in continuous service. Speed controlled by either frequency or voltage. The Vayuvents Private Limited Roof Extractor Fans are widely used in Steel Plants, industrial buildings, power plants, foundries ,Ceramics & Refractories Manufacturing, Tobacco Processing, Pipe Manufacturing Industry, Glass Processing, Mineral processing and Mining, Food & Spices Industries, etc. Technical Specifications- Airflow / Capacity - 11500 Cfm Or 19,491 M3/Hr Static Pressure - 15 mmwc Or 147

• Roof Ventilator
• Mechanical Ventilator
• 1.1 Kw Electric FRP Based Roof Exhaust Fan
• Electrically Operated Roof Extractor Fan
• Direct Drive Down blast Roof Exhaust Fan
• Roof Mount Centrifugal Direct Drive Ventilator
• Motorized Roof Exhaust Fan
• Attic Fan
• Roof Mounted Attic Fan
• Factory Ventilation System
• Roof Exhaust Motorized Fan
• Heat, Humid, Exhaust Roof ventilator
• Hazardous Fumes Roof Exhaust Fan

Motorized Roof Exhaust Fan manufacturerRoof Extractor Fan exportersRoof Extractor Fan mumbaiMotorized Roof Exhaust Fan IndiaRoof Extractor Fan services The Motorized Roof Air Ventilator that we offer is manufactured using high-grade materials and highly advanced techniques which are electrically powered by Motors and Contact with Motor RPM. The efficiency of Motorized Roof Air Ventilators is dependent on Wind Velocity. The Wind Velocity may not be adequate at times when Maximum Exhaust is required. When used alongwith Conventional Ventilators they can Provide Very Efficient Exhaust with Minimal Power Consumption

Additional Information:

• Production Capacity: 85
• Delivery Time: 5 days

The initial/project cost of the fan will be low.The tensile weight of the fan at roof elevation will be less.Motor h.P power consumption will be less , tends to lessElectrical power consumption and minimize the total running cost.Fan blade will be of ms epoxy coated light weight moulded gives the low dynamic torque on the roof.Ease in installation and maintenance if any in future.Top canopy will be of light weight made of FRP moulded.Special class construction with very easy to be mounted at roof level.

)Backed by the team of skilled professionals, we are manufacturing and supplying a wide assortment of Power Driven Roof Extractor that is electrically powered by motors. These ventilators are designed with using top notch quality material and sophisticated technology by our proficient professionals. The offered ventilators are demanded in those places where continuous exhaust of very high volume of air is required at a specific interval. Also, these ventilators are tested in terms of quality so as to dispatch a faultless range.Roof Top Ventilators Roof Top ExtractorsRoof ExtractorsMotorised Power VentilatorsRoof Exhaust BlowerElectrically Operated Roof Extractor FanMotorized Roof Exhaust Fan

Additional Information:

• Production Capacity: 80

Electrically Operated Roof Extractor Fan is a device that takes in air from every part or direction of the roof and brings this air back towards its center. As a result if there is any stale or bad odor air, it is removed. The extractor comes with turbine blades that rotates and also removes any warm moist vapor present in the building due to activating such as washing, heating etc. The design of the machine is such that it is easy to use and it can be used exhaustively to carry out desired air cleaning. It has the capacity to remove bad fumes, vapor no matter what the condition of keeping the environment inside the building clean.

We are providing Motorized Roof Extractor Fan to our valuable clients.

Power Driven Roof Extractor Fan are mounted at the roof elevation. Roof Top  Exhaust Fan are used for factory smoke, vapor, humidity, heat to exhaust. A powered attic ventilator, or attic fan, is a ventilation fan which regulates the heat level of a building's attic by exhausting hot air. A thermostat is used to automatically turn the fan off and on, while sometimes a manual switch is used. An attic fan can be gable mounted or roof mounted. Additional vents are required to draw in the fresh air as the hot air is exhausted. 

Additional Information:

• Packaging Details: WOODEN BOX

Electrically Operated Roof Extractor Fan is a device that takes in air from every part or direction of the roof and brings this air back towards its center. As a result if there is any stale or bad odor air, it is removed. The extractor comes with turbine blades that rotates and also removes any warm moist vapor present in the building due to activating such as washing, heating etc. The design of the machine is such that it is easy to use and it can be used exhaustively to carry out desired air cleaning. It has the capacity to remove bad fumes, vapor no matter what the condition of keeping the environment inside the building clean.

Roof Top Ventilators Roof Top ExtractorsRoof ExtractorsMotorised Power VentilatorsRoof Exhaust BlowerElectrically Operated Roof Extractor FanMotorized Roof Exhaust FanElectrically Operated Roof Extractor Fan manufacturerMotorized Roof Exhaust Fan manufacturerRoof Extractor Fan exportersRoof Extractor Fan mumbaiMotorized Roof Exhaust Fan IndiaRoof Extractor Fan services

Vayuvents tunnel ventilation Fans are specially designed and manufactured for optimum relation between air quantity and power consumption and to meet the exact demands of commercial and industrial ventilation in hot, humid, dusty and corrosive environments.

 

Construction :
The Cylindrical casing of fans is fabricated from mild steel plates or Stainless Steel with adequate size for fine clearances as is practicable for better efficiency and fitted with Flanges on both the ends. Foot mounting arrangements to facilitate installation of the fan, on the ground of frame look.

 

Impeller :

The impeller of axial flow fan is made of cast in aluminium alloy and dynamically balanced and aerofoil of blade is designed to have maximum efficiency at lesser motor Power.

 

Motors :
The standard make A.C motors are totally enclosed squirrel cage induction type suitable for ambient temperature up to 40° C. Flame proofs ( IIA/IIB/IIC) , vapor tight, Class F, Class H and other motors can also be supplied on request.

 

Bearing :
Ball or Ball and roller bearings are fitted as standard.

Driving Arrangements :
There are two types of drives – The direct drive arrangement or V – Belt drive arrangement.

The direct drive arrangement, impeller and motor are both housed inside the casing and impeller is directly mounted or motor shaft.

A powered attic ventilator, or attic fan, is a ventilation fan which regulates the heat level of a building's attic by exhausting hot air. A thermostat is used to automatically turn the fan off and on, while sometimes a manual switch is used. An attic fan can be gable mounted or roof mounted. Additional vents are required to draw in the fresh air as the hot air is exhausted. 

3 Hp/960 rpm, 
Airflow - 20,000 cfm 
Static Pressure- 20 mmwc

FRP Power Driven Roof Extractor Fan are mounted at the roof elevation. 

Electrically Operated Roof Extractor Fan is a device that takes in air from every part or direction of the roof and brings this air back towards its center. As a result if there is any stale or bad odor air, it is removed. The extractor comes with turbine blades that rotates and also removes any warm moist vapor present in the building due to activating such as washing, heating etc. The design of the machine is such that it is easy to use and it can be used exhaustively to carry out desired air cleaning. It has the capacity to remove bad fumes, vapor no matter what the condition of keeping the environment inside the building clean.

It is not uncommon to see people succumbing to diseases caused by bad smell. It easily causes lack of mental focus and concentration. In a building where there are many workers, chemicals and different manufacturing processes are occurring, there is bound to be a bad smell from time to time. This can make the work condition very uncomfortable which in turn affects worker productivity. Such hassles can be removed with the assistance of a Vayuvents Private Limited electrically operated roof extractor fan.  Here is a look at its key features:
• It can be placed on the roof of industries and factories for clean air cleaning needs
• Capable of extracting dust and particulate matter in minutes
• Body of the machine is made from fine quality material that is durable, long-lasting
• Has got energy efficiency so that it produces low electricity bills
• Available in varying speeds, capacities and dimensions